[sdiy] 0603 resistor markings

[Mattias Rickardsson]

If the auto-power-off timeout is controlled by a cap or resistor inside the
unit, you can perhaps improve it yourself after measuring it with the
meter... D'oh! ;-)

/mr

Den lör 18 feb. 2023 09:41jslee via Synth-diy <synth-diy at synth-diy.org>
skrev:

> On Thu, 16 Feb 2023, at 05:54, Ingo Debus via Synth-diy wrote:
>
> There are tweezer-shaped multimeters, would such a thing help? I for one
> would need a tool (i. e. a magnifier) for reading the label on a 0603 part
> anyway. For parts that are already soldered to a PCB you can compare the
> reading to a known good PCB.
>
>
> I picked up an example of these (in LCR/continuity/diode meter form)
> recently and they proved their worth almost immediately. Strong recommend
>
> I only wish the auto-power-off timeout was a bit longer
>
> John
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20230218/84dd85a7/attachment.htm>