[sdiy] kicad footprints for SR16 rotary swicthes?

[ShedSynth]

I’ve used these switches, bought from eBay:

https://shedsynth.wordpress.com/midiarp-a/

https://shedsynth.wordpress.com/clkdiv-c/

 

Only problem has been that the T18 knobs I used felt a bit loose on the splines.

 

From: Synth-diy <synth-diy-bounces at synth-diy.org> On Behalf Of Roman
Sent: 10 February 2023 06:54
To: synth-diy at synth-diy org <synth-diy at synth-diy.org>
Subject: Re: [sdiy] kicad footprints for SR16 rotary swicthes?

 

I used it in my MIDECO module. Really nice rotation feel at low price. No reported failure yet. 

I always make my own footprints guided by datasheet and recommend doing that for everyone. 

 

Roman 




---- Użytkownik Scott Bernardi via Synth-diy napisał ----

I'm trying to find kicad footprints for SR16 type rotary switches (16mm diameter, PC mount) that look like this

 

https://cubusynth.com/products/sr-16-2p4t-4-position-rotary-switch-16mm

 

  AliExpress has them in 

1 pole 5 pos

1 pole 6 pos

1 pole 8 pos

2 pole 4 pos

2 pole 3 pos

 

https://www.aliexpress.us/item/2251832764807484.html?gatewayAdapt=glo2usa <https://www.aliexpress.us/item/2251832764807484.html?gatewayAdapt=glo2usa&_randl_shipto=US> &_randl_shipto=US

 

It's the 2 and 3 position ones I'm interested in. I'm starting to build a EuroRack synth. so I want something that can be PC mounted behind a panel.

Good for switching oscillator waveforms to one output jack.  

Or what do others use?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20230210/c08c72ea/attachment.htm>