[sdiy] Synth Mixer
drheqx at gmail.com
Tue Sep 27 18:43:03 CEST 2022
I'm designing the mixer for the purpose of selling it. The mics should be
dynamics like an sm58. I'm not going to support phantom power because this
is a performance mixer, although we considered that for about 5 minutes.
The mixer will have +/-15v rails. I mention that because the mic pre needs
to sit on those and be very happy.
I'll check out the book though.
The one effect that i was thinking would be so cool is distortion for the
On Tue, Sep 27, 2022, 12:36 PM Mike Bryant <mbryant at futurehorizons.com>
> First question nowadays has to be what sort of mics ? Traditional
> low-impedance, USB or PDM.
> If it’s a pure analogue mixer then strongly suggest you buy Douglas Self’s
> book on audio design and use the circuits in there. The mic amp isn’t the
> best, but more than adequate for most uses.
> That said, are you sure it isn’t easier just to buy a small mixer as many
> come with licenced effects from the major players that you won’t be able to
> replicate yourself.
> *From:* Synth-diy [mailto:synth-diy-bounces at synth-diy.org] *On Behalf Of *drheqx
> via Synth-diy
> *Sent:* 27 September 2022 17:29
> *To:* synth-diy mailing list
> *Subject:* [sdiy] Synth Mixer
> I'm designing a new synth mixer for live performance. I am contemplating
> only one or two mic inputs. When I perform with synths I'm using a mic
> that's going into a different mixer that has effects. I may do built in
> basic effects and a loop for the mics. I'm focusing on the mic section
> right now.
> Opinions please.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Synth-diy