[sdiy] expo pair "heat shield?"

[Michael Zacherl]

I didn’t see any remains of old glue on this one, but this is from an original Moog VCO’s inside:



I wouldn’t want to see those wire-ties slide down off the transistors.
m. 

> On 11.10.2022, at 15:37, Matthew Skala via Synth-diy <synth-diy at synth-diy.org> wrote:
> 
> I put two TO-92 transistors face to face, with a cable tie to hold them
> together tightly, and I usually also add a dab of general-purpose plastic
> glue on top to keep the cable tie from sliding off.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20221011/6a14fc20/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Foto0900-xcrpt.jpg
Type: image/jpeg
Size: 27607 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20221011/6a14fc20/attachment.jpg>