[sdiy] Powering 4ms pod

[Gerry Murray]

It might be worth powering the PSU up with it disconnected so that it's 
output caps can charge up and then connect it to the 4ms Pod.
There might be enough charge present to overcome any turn-on surge and 
allow the pod to power up.
You might get a little spark as it makes connection.

As others have said, though, maybe best get a different power supply. 
Still, would be nice to know the root cause of the problem.

Gerry

On 02/11/2022 10:25, Didier Leplae via Synth-diy wrote:
> I hope this doesn’t exceed the file size limit, but here is a picture of the 4ms power section if that helps to determine what is going on.
> I may take Florian’s suggestion and try to return the supply that I bought. However, if they give me a hard time I’ll come back crying for more help.
>