[sdiy] Powering 4ms pod

[Florian Anwander]

Hello Didier

What about returning the one you bought, and get the right one:
https://www.thomann.de/de/4ms_power_brick_45w.htm
?

Florian

Am 01.11.22 um 16:46 schrieb Didier Leplae via Synth-diy:
> Hi,
> I live in the US but spending some time in Portugal and brought a 4ms Pod40 with me and a few modules.
> I’ve had the pod for a while but never tried using it until now. I also never had a power supply for it, so figured I would get a European supply for it while I’m here.
>
> Here are 4ms specs for what supplies will work:
> - 15-20vdc
> - positive Center 2.1mm barrel plug (5.5mm outer diameter)
> - minimum 20w output power
> - low-noise output
>
> I went to a local electronics store and bought a sort of universal supply. (The brand is “Classic” and model# PSE50249)
>   It has a tip which seems to fit, but says it is “5.5/2.5mm, 12mm”.
> When I plug it in to the 4ms pod, the power flashes on and off, every second or so, even with no modules or ribbon cables attached.
> Testing the supply with a voltmeter, it is indeed positive tip and around 19.5V.
>
> Does anyone have an idea what I’m doing wrong here?
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Usemarketplace at synth-diy.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20221101/94525998/attachment.htm>