[sdiy] sheet metal manufacture

[cheater cheater]

Nope, gotta make it copper.

On Tue, Jul 5, 2022 at 2:15 PM Mike Bryant <mbryant at futurehorizons.com> wrote:
>
> If you're ok with aluminium instead then JLCPCB will do that for a lot lot less
>
> -----Original Message-----
> From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of cheater cheater via Synth-diy
> Sent: 05 July 2022 12:44
> To: synth-diy
> Subject: [sdiy] sheet metal manufacture
>
> Hey all, I'm looking to get some sheet metal fabricated for a small project I'm working on. I tried PCB Way but they're a bit on the expensive side - are there any alternatives?
>
> Here's the thing: https://imgur.com/a/wgHpiQj
>
> It's essentially a 92x85mm copper plate, 1.2mm thick, with some holes cut into it. PCB Way came back with $92 for 4 units, which seems on the expensive side, but what do I know, maybe they're comparatively cheap. That's without shipping etc. I'll probably be looking to have it made in 1mm thickness as well.
>
> I'm located in Europe if that makes any difference.
>
> Thanks
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>