[sdiy] sheet metal manufacture

[Mike Bryant]

If you're ok with aluminium instead then JLCPCB will do that for a lot lot less

-----Original Message-----
From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of cheater cheater via Synth-diy
Sent: 05 July 2022 12:44
To: synth-diy
Subject: [sdiy] sheet metal manufacture

Hey all, I'm looking to get some sheet metal fabricated for a small project I'm working on. I tried PCB Way but they're a bit on the expensive side - are there any alternatives?

Here's the thing: https://imgur.com/a/wgHpiQj

It's essentially a 92x85mm copper plate, 1.2mm thick, with some holes cut into it. PCB Way came back with $92 for 4 units, which seems on the expensive side, but what do I know, maybe they're comparatively cheap. That's without shipping etc. I'll probably be looking to have it made in 1mm thickness as well.

I'm located in Europe if that makes any difference.

Thanks
_______________________________________________
Synth-diy mailing list
Synth-diy at synth-diy.org
http://synth-diy.org/mailman/listinfo/synth-diy
Selling or trading? Use marketplace at synth-diy.org