[sdiy] Who apart from me things the whole MIDI board needs replacing ?

Oren Leavitt obl64 at ix.netcom.com
Thu Jan 27 18:01:08 CET 2022


Cool! I was just last night wondering if anyone was using dual LED optos 
for MIDI IN.

On 1/27/22 3:49 AM, Roman Sowa wrote:
> There are also optocouplers with dual LEDs in reverse, so polarity 
> doesn't matter without hassle of adding diodes. For example APCL214, 
> which I've used in my MIDI2CV converters. Not only it provided 
> mistake-free wiring, but was also smaller than typical SOP5 optocoupler.
>
> Roman
>
> W dniu 2022-01-26 o 20:04, Sean Ellis via Synth-diy pisze:
>> Quite a few modules do it:
>> https://raw.githubusercontent.com/jakplugg/Neutron-Sound-Dust-of-Time/master/schematic.pdf 
>> <https://raw.githubusercontent.com/jakplugg/Neutron-Sound-Dust-of-Time/master/schematic.pdf> 
>>
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Synth-diy <synth-diy-bounces at synth-diy.org> on behalf of 
>> Quincas Moreira via Synth-diy <synth-diy at synth-diy.org>
>> *Sent:* Wednesday, 26 January 2022 3:11 PM
>> *To:* Mattias Rickardsson <mr at analogue.org>
>> *Cc:* Synth DIY <synth-diy at synth-diy.org>
>> *Subject:* Re: [sdiy] Who apart from me things the whole MIDI board 
>> needs replacing ?
>> Matias, the Tukra by Tesseract does the same. Works with both 
>> standards for the input and has selectable output.
>> I appreciate the nostalgic love for Din connectors but they seriously 
>> limit the size and shape of the devices. I like how things are skinny 
>> these days… And yes, while the standard chose a smaller barrel, this 
>> was indeed done too late when already all manufacturers are using 
>> 3.5mm. They should have stuck to that and just chosen one polarity to 
>> be the standard  IMO.
>> BTW I’ve been using 3.5mm trs MIDI for nearly a decade myself and 
>> have never encountered a ground loop issue.
>>
>> On Wed 26 Jan 2022 at 4:57 Mattias Rickardsson <mr at analogue.org 
>> <mailto:mr at analogue.org>> wrote:
>>
>>     <grant at musictechnologiesgroup.com
>>     <mailto:grant at musictechnologiesgroup.com>> skrev:
>>
>>         Hey, it only took them a decade or so to include a messed up
>>         standard for 1/8" TRS connectors.
>>
>>
>>     But the MIDI standard for TRS jacks ended up using 2.5 mm jacks, not
>>     3.5 mm (1/8"). Just to avoid confusion. (-:
>>
>>     3.5 mm was already the de-facto standard by then. But half of the
>>     manufacturers ended up using one polarity and the other half chose
>>     the other, which potentially makes MIDI devices incompatible, unless
>>     special cables/adapters are at hand.
>>
>>     In Elektron's Model series of instruments we implemented the TRS
>>     MIDI In to accept any polarity (passively, using diodes!), and a
>>     setting in the UI chooses between the two polarities for the TRS
>>     MIDI Out. Has this been done anywhere else? I've always felt that it
>>     perhaps should be published as an official application note, a
>>     suggested implementation superpower for other manufacturers to pick
>>     up. :-)
>>
>>     /mr
>>
>>     _______________________________________________
>>     Synth-diy mailing list
>>     Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>>     http://synth-diy.org/mailman/listinfo/synth-diy
>>     <http://synth-diy.org/mailman/listinfo/synth-diy>
>>     Selling or trading? Use marketplace at synth-diy.org
>>     <mailto:marketplace at synth-diy.org>
>>
>> -- 
>> QMA
>> Quincas Moreira
>> Director | QMA
>> mobile: 5534988825 <tel:5534988825>
>> site: quincasmoreira.com <http://quincasmoreira.com/>
>> email: quincas at gmail.com <mailto:quincas at gmail.com>
>>
>>
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>> Selling or trading? Use marketplace at synth-diy.org
>>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org



More information about the Synth-diy mailing list