[sdiy] Question for the self-assembly SMD-ers here

[Ben Stuyts]

Mike,

Have a look at allpcb.com <http://allpcb.com/>. I send parts to them on a fairly regular basis for pcb assembly. Series are usually between 50 and 250 pcs, so I’m not sure how it would work out if you would order only a few.

Ben



> On 18 Feb 2022, at 20:14, Mike Bryant <mbryant at futurehorizons.com> wrote:
> 
> They only take full reels, and even then they want you to pay them to buy it from the supplier so they can add their cut on it.  A reel of these would be about $20k and last me a decade or two :-)
>  
> They keep saying they are introducing buying of ‘Mousereels’ part-reels from Mouser but never do.
>  
>  
>  
> From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Tom Bugs via Synth-diy
> Sent: 18 February 2022 18:56
> To: synth-diy at synth-diy.org
> Subject: Re: [sdiy] Question for the self-assembly SMD-ers here
>  
> Can't you send a suitable quantity to JLCPCB for them to fit?
> 
> On 18/02/2022 16:40, Mike Bryant wrote:
> Is it possible to assemble this product by hand ?
>  
> https://www.infineon.com/cms/en/product/power/class-d-audio-amplifier-ic/integrated-class-d-audio-amplifier-ics/ma5332ms/?redirId=160809 <https://www.infineon.com/cms/en/product/power/class-d-audio-amplifier-ic/integrated-class-d-audio-amplifier-ics/ma5332ms/?redirId=160809>
>  
> I can get a PCB made at JLCPCB with all the support circuitry on it and leave plenty of space for this IC, but not sure if it’s possible to assemble this part afterwards.
> It has a recommended stencil design in the datasheet which seems pretty tight for manual placement.
>  
> Alternatively anybody in the UK with whatever equipment is needed and willing to do it (paid for obviously) please email me.
>  
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
> http://synth-diy.org/mailman/listinfo/synth-diy <http://synth-diy.org/mailman/listinfo/synth-diy>
> Selling or trading? Use marketplace at synth-diy.org <mailto:marketplace at synth-diy.org>
> -- 
> BugBrand LTD
> UK company No. 07199808
> VAT No. GB 988 2629 57
> 1 Ninetree Hill
> BRISTOL BS1 3SB
> United Kingdom
> www.bugbrand.co.uk <http://www.bugbrand.co.uk/>_______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20220218/d8c3275e/attachment.htm>