[sdiy] MIDI channel footswitch changer gizmo ..

[Roman Sowa]

Any MIDI utility box advertized as "MIDI processor" can do this. I think 
MIDI Solutions would be best.
Actually I almost implemented it once in my MIDI controller, but finally 
gave up the idea, because "whoo needs that anyway".

Roman

W dniu 2022-02-09 o 15:20, Jean-Pierre Desrochers pisze:
> Hi all,
> 
> I own a DIY MIDI bass pedal that sets it’s MIDI channel on power up.
> You press one of the first 16 keys (2 octaves pedal board) while powering up
> and that’s the MIDI channel that remains. Ok.
> 
> But what if I need to change the MIDI channel on the fly while playing ??
> 
> I tried to find a footswitch gizmo that would have MIDI IN/OUT
> that I could connect the bass pedal MIDI OUT to the gizmo MIDI IN and 
> set/change
> the gizmo MIDI channel using its footswitches then the incoming MIDI channel
> would be overridden by the gizmo’s channel  and this one would use its 
> channel
> number for my pedal board..
> 
> But no luck to find this type of MIDI ‘interface’..
> So far I’m thinking about building one..
> Any clue for this type of gadget to buy ?
> 
> Cheers,
> 
> Jean-Pierre
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>