[sdiy] Issue with CD4024 Ripple Counter
mr at analogue.org
Sun Sep 19 10:46:12 CEST 2021
David G Dixon via Synth-diy <synth-diy at synth-diy.org> skrev:
> I should also mention that, on the ASR, the signal from the diode to the
> Clock pin also goes through a 10k resistor to a 5.1V zener to ground, then
> through another 10k resistor into an inverting opamp with a 5V level shift
> (-12V through a 24k resistor into the inverting node). Hence, there are
> lots of places for pent-up current to leak off to.
There are also lots of components that could lead to unexpected behavior.
The capacitance of the zener diode, for instance, could that contribute?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Synth-diy