[sdiy] Issue with CD4024 Ripple Counter

[Ben Stuyts]

> On 18 Sep 2021, at 16:23, Tim Stinchcombe <tim102 at timstinchcombe.co.uk> wrote:
> 
>> The 4024 already has schmitt-trigger input. (Not on the reset line
> though.)
>> Datasheet says unlimited rise/fall time is allowed.
> 
> I'd be a little hesitant to suggest that this is so for _all_ makes of
> CD4024 chips - on this Fairchild datasheet the maximum 'input rise and fall
> times' given suggest there is a limit that one is recommended to not exceed:
> 
> https://media.digikey.com/pdf/Data%20Sheets/Fairchild%20PDFs/CD4024BC.pdf

$DEITY! That is confusing even more. And different timing again.

I was looking at TI and ON Semi:

https://www.ti.com/lit/ds/symlink/cd4024b.pdf?ts=1631976289114 <https://www.ti.com/lit/ds/symlink/cd4024b.pdf?ts=1631976289114>
https://www.onsemi.com/pdf/datasheet/mc14024b-d.pdf <https://www.onsemi.com/pdf/datasheet/mc14024b-d.pdf>

which both have the Schmitt-trigger input. Fairchild doesn’t even mention it.

Ben

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20210918/7695d10f/attachment.htm>