[sdiy] Does anyone here use JLCPCB for SMD assembly ?

[Roman Sowa]

Here's a short list I made for a friend from UK who complained their 
local service in that are is terrible:

At one time when I was selecting manufacturing parter, I wanted JM to be 
the one. They seem to be super quality, and not that far from my place. 
Back then they said that 100 of something with around 50 components is 
absolutely something they would love to do. But this may have changed.

https://elzab-manufacturing.com
https://en.elhurt.com/electronics-manufacturing-services/electronics-assembly/
https://printor.pl/en/
https://www.sims.pl/en/
https://ente.com.pl/en/contract-manufacturing-of-electronics-ems/
https://www.jm-ems.pl/offer,66.html
https://www.eae-elektronik.pl/en/
https://www.prototypy.com/t/61,Home

Strangely enough I do all assembly in-house, so can't really share any 
first hand experience with those.

There was an article some time ago in industry magazine here about EMS, 
where they included a few of the companies. There was a chart with about 
70 companies showing who does what. It's in jpg so you have to type all 
the links and in Polish, so if anyone is brave enough to try, I can 
share it.

Roman


W dniu 2021-10-27 o 16:48, Mike Bryant pisze:
> Always willing to consider anything advantageous to my bottom line.  Can we have some links to potential PCB manufacture and assembly houses and I'll investigate ?
> 
> 
> 
> -----Original Message-----
> From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Roman Sowa
> Sent: 27 October 2021 15:37
> To: synth-diy at synth-diy.org
> Subject: Re: [sdiy] Does anyone here use JLCPCB for SMD assembly ?
> 
> Have anyone considered ordering assembly in Poland?
> We have lots of places doing all sort of things from designing circuit to shipping final products in foiled colorful box to end customers and everything in between. Couple of years ago it was advertized as "Chinese prices, European quality".
> 
> Roman
> 
> W dniu 2021-10-27 o 16:06, Neil Johnson via Synth-diy pisze:
>> Hi Mike,
>>
>>> When SMD assembly was a new service at JLCPCB there were obviously teething problems.  For example parts shown as rotated online and so on but the PCBs always came back fine as they spent time fixing everything.
>>
>> Have you tried PCBWay?  I know they are used by several instrument
>> manufacturers.
>>
>> Neil
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>> Selling or trading? Use marketplace at synth-diy.org
>>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>