[sdiy] Minimoog 2016 reissue model D

Fri Oct 1 00:44:14 CEST 2021

Thanks for your replies.

 These are the replies i received from Moog:

"Thanks for reaching out to us. We do have Model D Reissue VCF boards available, I can sell you one for $163 plus shipping."
And
"You are correct that the VCF board from the Reissue is not compatible with the vintage version, although they are very similar. Unfortunately, I cannot give out schematics for the Reissue boards,"

What i find strange is a company produces a new product , agrees to sell me a spare part , agrees it's not compatible , but won't provide any assistance.

________________________________
From: Synth-diy <synth-diy-bounces at synth-diy.org> on behalf of Florian Anwander <fanwander at mnet-online.de>
Sent: Thursday, 30 September 2021 11:37 PM
To: synth-diy at synth-diy.org <synth-diy at synth-diy.org>
Subject: Re: [sdiy] Minimoog 2016 reissue model D

Hi Amos, :-)

electrically for sure, but not physically:  all connections are done with ribbon cables and the potentiometers and many resistors are on a pcb instead of being wired flying.

Florian (not sure about the correct grammar of "being flying wired")

Am 30.09.21 um 16:51 schrieb Amos via Synth-diy:
Except for the keyscan and left-hand control PCB (which has an LFO not present in the original) it's a fairly painstaking clone of the original. I'd say 98% of it would be accurately covered by a vintage Model D service manual.

On Thu, Sep 30, 2021 at 4:45 AM Florian Anwander <fanwander at mnet-online.de<mailto:fanwander at mnet-online.de>> wrote:
Hi

I owned ReIssue for two years or so. I wanted to mod it and asked the german distributor and Rudi Linhard regarding a service manual. Both didn't have it.

Florian

Am 30.09.21 um 08:15 schrieb geoff james via Synth-diy:
Hi , seeking a service manual for the above.

I've googled without success.

Any help appreciated.

_______________________________________________
Synth-diy mailing list
Synth-diy at synth-diy.org<mailto:Synth-diy at synth-diy.org>
http://synth-diy.org/mailman/listinfo/synth-diy
Selling or trading? Use marketplace at synth-diy.org<mailto:marketplace at synth-diy.org>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20210930/e1c3b46d/attachment.htm>