[sdiy] Quantizer project.. incoming CV's switching point to change to quantized output CV's ...

Mike Bryant mbryant at futurehorizons.com
Sun Jul 4 22:26:03 CEST 2021

Won’t this kill any diminished or augmented triads ?  And sometimes minor triads ?

Though I accept those don’t exist in many of those scales.

From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Jean-Pierre Desrochers
Sent: 04 July 2021 19:45
To: 'SDIY'
Subject: Re: [sdiy] Quantizer project.. incoming CV's switching point to change to quantized output CV's ...

I think i managed the problem..
Here is an Excel view of some exotic scales..
column B shows the incoming CV voltages
and column D shows where the tripping points are..
For example:
In the Triad scale,  an incoming key of G (0,5833v) will output a quantized G note
as long as it stay in the boundary between 0,5417v and 0,6250v
and will stay on this key if the next incoming key gets in the pink areas.
Otherwise it will switch to another quantized key.
Or maybe that’s not the way to manage the problem..

[cid:image001.jpg at 01D7711B.3110F6D0]

De : Synth-diy [mailto:synth-diy-bounces at synth-diy.org] De la part de Jean-Pierre Desrochers
Envoyé : 4 juillet 2021 13:35
À : 'SDIY'
Objet : [sdiy] Quantizer project.. incoming CV's switching point to change to quantized output CV's ...

I'm starting a CV quantizer design and am wondering
about the following things:

Let's assume a normal quantized semi-tone scale:
All the incoming CV's are quantized to semi-tones like this:
incoming CV 'around' C, output quantized CV -> C
incoming CV 'around' C#, output quantized CV -> C#
incoming CV 'around' D, output quantized CV -> D
and so on..
12 equally spaced output quantized intervals. OK.

But if the quantized scale output is a TRIAD like
C-E-G-C-E-G-C, etc... ( 3 quantized intervals)

where are the switching bounderies of each incoming note CV's
to change to the next outputed quantized note ?
This question is for ascending and/or descending notes..

Same question for a quantized PENTATONIC major scale output like
C-D#-F-G-A#-C-D#-F-G-A#-C, etc.. ( 5 quantized intervals)

I would think of dividing the octave range with
equal intervals with the number of intervals
inside the actual quantized scale..
For example:
That's 3 intervals
1 octave = 1 volt
so 1volt/3 intervals = 0.333v between each quantized notes (??)


PENTATONIC major scale C-D#-F-G-A#-C
That's 5 intervals
1 octave = 1 volt
so 1volt/5 intervals = 0.20v between each quantized notes (??)

But... I don't think that is working this way..
I think I must keep the incoming CV interval sizes
and use them for the quantized switch points.. (???)

Your opinion on that ??
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20210704/d87ecc25/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 110254 bytes
Desc: image001.jpg
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20210704/d87ecc25/attachment.jpg>

More information about the Synth-diy mailing list