[sdiy] Analog Devices SigmaDSP
barryklein at cox.net
Thu Dec 2 08:13:14 CET 2021
Cool. Thanks, was totally unaware of this.
> On Dec 1, 2021, at 11:09 PM, Mike Bryant <mbryant at futurehorizons.com> wrote:
> TI have quite a few, but start at the TLV320AIC3256.
> They use the PurePath development system
> -----Original Message-----
> From: Barry Klein [mailto:barryklein at cox.net]
> Sent: 02 December 2021 07:04
> To: Mike Bryant
> Cc: synth-diy at synth-diy.org
> Subject: Re: [sdiy] Analog Devices SigmaDSP
> Do you recall the TI part? I haven’t looked at them seriously yet. Do they have a similar programming interface, maybe Audioweaver or something? For my work right now I am investigating ANR solutions. The actual programming of these would go to someone else - I just am investigating what is being done. There was one called RNnoise that was impressive.
>> On Dec 1, 2021, at 9:36 PM, Mike Bryant <mbryant at futurehorizons.com> wrote:
>> I use the ADAU1701, programming it with SigmaStudio. You probably could build a synth with it by linking it with an MCU to do some of the slower control stuff, and to interface with MIDI or whatever.
>> There's also a similar, though not compatible TI part with moreorless the same spec.
>> As you say they are very cheap so get an eval and try it. It's a bit frustrating getting Sigma Studio going at first - it's not the most intuitive of software packages - but by flicking around the pages you should get something going. I think there are sine and other (possibly non-band-limited) waveform generators in there somewhere.
>> -----Original Message-----
>> From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Barry Klein via Synth-diy
>> Sent: 02 December 2021 05:27
>> To: Synth DIY
>> Subject: [sdiy] Analog Devices SigmaDSP
>> I’ve always been intrigued by Analog Devices SigmaStudio software as it looks so much like a software synth. Any of you have experience with it and whether someone like me with very poor math and programming background could get some enjoyment trying an eval board with one? I suppose I’d be willing to try learning basics with a decent book… There are so many different chips that I’m overwhelmed. I see diy board offerings for boom boxes that are amazingly cheap - Google Wondom DSP. I also have a daisy board but don’t have the programming skills to get anywhere with it. I haven’t given up - just distracted now by this as we may use one at work.
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> Selling or trading? Use marketplace at synth-diy.org
More information about the Synth-diy