[sdiy] Best chinese PCB manufacturer (cheap and fast) to Canada and USA ?

cheater cheater cheater00social at gmail.com
Thu Aug 26 13:03:50 CEST 2021


What do you guys use if you need the whole pcb manufactured and
soldered? And do you have the company source parts, or do you provide
them?

On Thu, Aug 26, 2021 at 12:25 PM John Staapel via Synth-diy
<synth-diy at synth-diy.org> wrote:
>
> Try https://pcbshopper.com/
> JLCPCB quality is not great but good enough if you need to solder 1 time.  The PCB is low TG
> AllPCB is more expensive but can made larger PCB and you can choose different pcb material and higher TG
> Assembling JLCPCB works but do not expect a lot of it
>
> Op do 26 aug. 2021 om 11:28 schreef Roman Sowa <modular at go2.pl>:
>>
>> I would argue about quality. There are PCB houses in my country making
>> even higher quality than JLCPCB and others. They also offer fast service.
>> Unfortunately they are much more expensive, I used them only when I had
>> to from various reasons.
>>
>> My impression is that JLCPCB is cheaper than PCBWAY, but slightly
>> inferior quality. Also, PCBWAY does the panelization way better than
>> JLCPCB. If I want routing, I'd rather make the design already panelized
>> by meself for JLC.
>>
>> Roman
>>
>> W dniu 2021-08-25 o 22:38, Mike Bryant pisze:
>> > Agreed.  Faster than and much cheaper than any European supplier, and quality is higher.
>> >
>> >
>> > -----Original Message-----
>> > From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Chris McDowell via Synth-diy
>> > Sent: 25 August 2021 21:25
>> > To: doug at synthark.com
>> > Cc: synth-diy at synth-diy.org
>> > Subject: Re: [sdiy] Best chinese PCB manufacturer (cheap and fast) to Canada and USA ?
>> >
>> > I'm also using JLCPCB. great prices and wildly affordable low volume assembly.
>> >
>> > chris
>> >
>> > Sent from my iPhone
>> >
>> >> On Aug 25, 2021, at 3:07 PM, doug at synthark.com wrote:
>> >>
>> >> I'm currently using JLCPCB, but I've used Seeed Studio previously (no complaints, just better pricing through JLC).
>> >>
>> >> ---
>> >> Doug Huseby
>> >> http://synthark.com
>> >> http://synthark.org
>> >>
>> >>
>> >>> On 2021-08-25 13:39, Jean-Pierre Desrochers wrote:
>> >>> I'm sure this topic has been talked about but here is my question:
>> >>> Anybody has and still uses a good chinese PCB manufacturer for his pcbs ?
>> >>> Cheap and fast..  delivery to Canada and USA ?
>> >>> -For very small quantity (1-5 pcbs)
>> >>> -Small sizes pcbs (mostly < 25 square inches) ??
>> >>> _______________________________________________
>> >>> Synth-diy mailing list
>> >>> Synth-diy at synth-diy.org
>> >>> http://synth-diy.org/mailman/listinfo/synth-diy
>> >>> Selling or trading? Use marketplace at synth-diy.org
>> >> _______________________________________________
>> >> Synth-diy mailing list
>> >> Synth-diy at synth-diy.org
>> >> http://synth-diy.org/mailman/listinfo/synth-diy
>> >> Selling or trading? Use marketplace at synth-diy.org
>> >
>> > _______________________________________________
>> > Synth-diy mailing list
>> > Synth-diy at synth-diy.org
>> > http://synth-diy.org/mailman/listinfo/synth-diy
>> > Selling or trading? Use marketplace at synth-diy.org
>> >
>> > _______________________________________________
>> > Synth-diy mailing list
>> > Synth-diy at synth-diy.org
>> > http://synth-diy.org/mailman/listinfo/synth-diy
>> > Selling or trading? Use marketplace at synth-diy.org
>> >
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>> Selling or trading? Use marketplace at synth-diy.org
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org



More information about the Synth-diy mailing list