[sdiy] Best chinese PCB manufacturer (cheap and fast) to Canada and USA ?

John Staapel j.staapel at gmail.com
Thu Aug 26 12:22:16 CEST 2021


Try https://pcbshopper.com/
JLCPCB quality is not great but good enough if you need to solder 1 time.
The PCB is low TG
AllPCB is more expensive but can made larger PCB and you can choose
different pcb material and higher TG
Assembling JLCPCB works but do not expect a lot of it

Op do 26 aug. 2021 om 11:28 schreef Roman Sowa <modular at go2.pl>:

> I would argue about quality. There are PCB houses in my country making
> even higher quality than JLCPCB and others. They also offer fast service.
> Unfortunately they are much more expensive, I used them only when I had
> to from various reasons.
>
> My impression is that JLCPCB is cheaper than PCBWAY, but slightly
> inferior quality. Also, PCBWAY does the panelization way better than
> JLCPCB. If I want routing, I'd rather make the design already panelized
> by meself for JLC.
>
> Roman
>
> W dniu 2021-08-25 o 22:38, Mike Bryant pisze:
> > Agreed.  Faster than and much cheaper than any European supplier, and
> quality is higher.
> >
> >
> > -----Original Message-----
> > From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of
> Chris McDowell via Synth-diy
> > Sent: 25 August 2021 21:25
> > To: doug at synthark.com
> > Cc: synth-diy at synth-diy.org
> > Subject: Re: [sdiy] Best chinese PCB manufacturer (cheap and fast) to
> Canada and USA ?
> >
> > I'm also using JLCPCB. great prices and wildly affordable low volume
> assembly.
> >
> > chris
> >
> > Sent from my iPhone
> >
> >> On Aug 25, 2021, at 3:07 PM, doug at synthark.com wrote:
> >>
> >> I'm currently using JLCPCB, but I've used Seeed Studio previously (no
> complaints, just better pricing through JLC).
> >>
> >> ---
> >> Doug Huseby
> >> http://synthark.com
> >> http://synthark.org
> >>
> >>
> >>> On 2021-08-25 13:39, Jean-Pierre Desrochers wrote:
> >>> I'm sure this topic has been talked about but here is my question:
> >>> Anybody has and still uses a good chinese PCB manufacturer for his
> pcbs ?
> >>> Cheap and fast..  delivery to Canada and USA ?
> >>> -For very small quantity (1-5 pcbs)
> >>> -Small sizes pcbs (mostly < 25 square inches) ??
> >>> _______________________________________________
> >>> Synth-diy mailing list
> >>> Synth-diy at synth-diy.org
> >>> http://synth-diy.org/mailman/listinfo/synth-diy
> >>> Selling or trading? Use marketplace at synth-diy.org
> >> _______________________________________________
> >> Synth-diy mailing list
> >> Synth-diy at synth-diy.org
> >> http://synth-diy.org/mailman/listinfo/synth-diy
> >> Selling or trading? Use marketplace at synth-diy.org
> >
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at synth-diy.org
> > http://synth-diy.org/mailman/listinfo/synth-diy
> > Selling or trading? Use marketplace at synth-diy.org
> >
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at synth-diy.org
> > http://synth-diy.org/mailman/listinfo/synth-diy
> > Selling or trading? Use marketplace at synth-diy.org
> >
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20210826/2296e751/attachment.htm>


More information about the Synth-diy mailing list