[sdiy] patch panel normalizing sanity check

cheater cheater cheater00social at gmail.com
Wed Aug 4 09:20:10 CEST 2021


Also - if you want to have multiple things normalled into one input,
then disconnect both when that input is being used.

On Wed, Aug 4, 2021 at 9:19 AM cheater cheater
<cheater00social at gmail.com> wrote:
>
> That's not a usual thing to do. If you have an LFO and ENV on the VCA,
> you'd probably have them hard wired and have depth knobs on both. Or
> otherwise you'd have two inputs, one normalled to ENV, and one to LFO.
> If you don't want a depth knob, you can plug in an empty plug into the
> LFO-normalled jack to get rid of it. Otherwise just have two depth
> knobs next to those two inputs. Or have one without a depth knob (for
> ENV) and one with (for LFO).
>
> On Wed, Aug 4, 2021 at 7:38 AM Neil Harper via Synth-diy
> <synth-diy at synth-diy.org> wrote:
> >
> >
> >
> > On 8/2/21 2:31 AM, cheater cheater via Synth-diy wrote:
> > > Yes, you want the selection on the inputs.
> > >
> > > This is important because you want some CVs to be normalled to multiple places.
> > >
> > > For example, this is really important for Pitch CV.
> >
> >
> > What about connections that have multiple CV's normalled to a single
> > place? For example, a VCA that's connected to an envelope generator and
> > an LFO by default. Is the expected behavior there that plugging into the
> > VCA CV input would disconnect both the EG and the LFO?
> >
> >
> > --
> > /// Neil Harper
> > /// Every Wave is New Until it Breaks
> >
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at synth-diy.org
> > http://synth-diy.org/mailman/listinfo/synth-diy
> > Selling or trading? Use marketplace at synth-diy.org


More information about the Synth-diy mailing list