[sdiy] Simulator for The Oscilloscope Artist

[Terry Bowman]

> On Aug 9, 2021, at 2:05 AM, Werner Flügel <werner.fluegel at b-tu.de> wrote:
> 
> I attached a LFO simulation I made years ago for a phaser. The circuit is quite the same as in the oscilloscope artist, you can adapt the Rs and Cs as in your schematic. Works with LTSpice.

Thank you.


> On Aug 8, 2021, at 9:08 PM, Adrian Corston <eidorian at aladan.net <mailto:eidorian at aladan.net>> wrote:
> I still have a few spare PCBs for this if anyone wants one.  Made from the publicly available gerbers Phil Baljeu put on his github: https://github.com/psyingo/OGA/tree/master/Oscilloscope_Graphic_Artist_updated <https://github.com/psyingo/OGA/tree/master/Oscilloscope_Graphic_Artist_updated>

Wow. I have Dave Dixon's version and another by Tim Ressell but I've never seen this one before! 

The version of the pdf in the GitHub project is the older one with a really stupid typo. I've emailed Phil.

The graphics in that version are really crummy. I need to re-scan them and update the whole thing. The magazine is around here—somewhere.


Terry Bowman, KA4HJH
"The Mac Doctor"

"If only you could see what I've seen with your eyes."—Roy Batty, Blade Runner

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20210809/fc6677dc/attachment.htm>