[sdiy] Need goog working rotary encoder in C code..

Julien jdelgoulet at free.fr
Fri Aug 6 18:53:48 CEST 2021

Mutable instruments repo ? : https://github.com/pichenettes/avril/blob/master/devices/rotary_encoder.h

Envoyé de mon iPhone

> Le 6 août 2021 à 17:52, Jean-Pierre Desrochers <jpdesroc at oricom.ca> a écrit :
> Hi everybody.
> I’m doing some tests on a rotary encoder and a PIC16F1783.
> A standard Bourns encoder like THIS .
> Connected using 2 x 10k pullups with 0.01uf caps to ground
> to PORTB of the micro. Interrupt calls (falling edges) used on encoder pins A & B.
> I struggled so far to get clean increments/decrements out of it.
> Many missing counts occur..
> I tried many source codes on the web with no luck..
> Is there anybody who’d have worked on this in the past
> and have a working c code ?
> No ARDIUNO please.
> Thanks !
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20210806/e97825c2/attachment.htm>

More information about the Synth-diy mailing list