[sdiy] Fwd: Moog sequencer 960 analysis.. using external clock.. possible ??

[Gert Jalass]

Oops - forget to notify the list, too ...

> Anfang der weitergeleiteten Nachricht:
> 
> Von: Gert Jalass <synth at gjalass.com>
> Betreff: Wtr: [sdiy] Moog sequencer 960 analysis.. using external clock.. possible ??
> Datum: 24. September 2020 um 21:54:55 MESZ
> An: Jean-Pierre Desrochers <jpdesroc at oricom.ca>
> Kopie: Gert Jalass <synth at gjalass.com>
> 
> Did forget to add before …
> 
> To complicate matters - you have to use the 961 to combine stage OUT’s. But they are „static“ high as long the stage is active :-(
> 
> This is why the Q963 „Width Feature Cable“ is being offered by DotCom.
> Or people have let modified their Moog modules …
> Or why the Moon 563 does exist ...
> 
> All the best
> Gert
> 
> 
>> Anfang der weitergeleiteten Nachricht:
>> 
>> Von: Gert Jalass <synth at gjalass.com <mailto:synth at gjalass.com>>
>> Betreff: Aw: [sdiy] Moog sequencer 960 analysis.. using external clock.. possible ??
>> Datum: 24. September 2020 um 21:45:16 MESZ
>> An: Jean-Pierre Desrochers <jpdesroc at oricom.ca <mailto:jpdesroc at oricom.ca>>
>> Kopie: Gert Jalass <synth at gjalass.com <mailto:synth at gjalass.com>>, Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>> 
>> Salut Jean-Pierre,
>> 
>> this is possible, of course ...
>> 
>> The „SHIFT IN“ jack right to the pushbutton is doing the job.
>> 
>> All the best
>> Gert
>> 
>> 
>>> Am 24.09.2020 um 18:09 schrieb Jean-Pierre Desrochers <jpdesroc at oricom.ca <mailto:jpdesroc at oricom.ca>>:
>>> 
>>> Is-it possible that there is no way to use and external oscillator (clock) 
>>> To advance the stages of the 960 ?
>>>  
>>> Shift input only add pulses asynchronously to the present (or not) internal oscillator.
>>> When this osc is OFF, pressing the SHIFT button would (I think) only advance to the next stage
>>> BUT there are no OSC-OUT square pulses generated (for ADSR) so the user cannot hear
>>> What the selected stage’s voltages are.. (???)
>>> Am-I missing something ?
>>> See the attached partial schematic.
>>> In some situations I need to be able to 'clock' this sequencer externally ..
>>> JP
>>>  
>>> <image001.jpg>
>>>  
>>> <image002.jpg>
>>>  
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>>> http://synth-diy.org/mailman/listinfo/synth-diy <http://synth-diy.org/mailman/listinfo/synth-diy>
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200924/2628161e/attachment.htm>