[sdiy] Toggle switch for mic

[TERRY SHULTZ]

Try this site as a source http://recordinghacks.com/microphones <http://recordinghacks.com/microphones>

Regards,

Terry

> On Sep 22, 2020, at 6:38 AM, ColinMuirDorward <colindorward at gmail.com> wrote:
> 
> Oh yeah good idea, I'll send them an email.
> 
> The MXL-990 that I'm looking to add the switch to is an LDC with a wide, short body:
> 
> http://recordinghacks.com/microphones/MXL/990 <http://recordinghacks.com/microphones/MXL/990>
> 
> On Tue, Sep 22, 2020, 6:30 AM TERRY SHULTZ, <thx1138 at earthlink.net <mailto:thx1138 at earthlink.net>> wrote:
> Hi Collin,
> 
> Perhaps you could ask them where they sourced their switches. Just thought this might be a good spot to try.
> 
> These folks have been easy to work with in previous emails. I will check with some my pals in the Hollywood Sapphire Group that build microphones for a living.
> 
> If you could tell me more about your mic, that would help.
> 
> Best regards,
> 
> Terry
> 
>> On Sep 22, 2020, at 6:25 AM, ColinMuirDorward <colindorward at gmail.com <mailto:colindorward at gmail.com>> wrote:
>> 
>> Thanks Terry, they don't seem to sell individual parts, though.
>> C
>> 
>> On Tue, Sep 22, 2020, 5:53 AM TERRY SHULTZ, <thx1138 at earthlink.net <mailto:thx1138 at earthlink.net>> wrote:
>> microphone-parts.com <http://microphone-parts.com/>
>> 
>> These guys have pretty good kits and parts
>> 
>> Regards,
>> 
>> Terry
>> 
>>> On Sep 21, 2020, at 8:42 PM, ColinMuirDorward <colindorward at gmail.com <mailto:colindorward at gmail.com>> wrote:
>>> 
>>> Doug, that's a really good idea, but in this case, there isn't one!
>>> C
>>> 
>>> On Mon, Sep 21, 2020, 8:35 PM Doug Jackson, <doug at doughq.com <mailto:doug at doughq.com>> wrote:
>>> I would re-task the on/off switch on the Mic.  
>>> 
>>> I am personally not a fan of on/off switches on microphones.  It all too often creates a comical situation where an inexperienced presenter is talking - silently - while looking at the sound people wondering why they are silent.  Only to discover later that they turned the mic off.......
>>> 
>>> I normally bypass them.
>>> 
>>> It then falls to the job of the desk operator to turn the mic on / off as required.
>>> 
>>> Kindest regards,
>>> 
>>> Doug Jackson
>>> 
>>> em: doug at doughq.com <mailto:doug at doughq.com>
>>> ph: 0414 986878
>>> 
>>> Check out my awesome clocks at www.dougswordclocks.com <http://www.dougswordclocks.com/>
>>> Follow my amateur radio adventures at vk1zdj.net <http://vk1zdj.net/>
>>> 
>>> -----------------------------------------------------------
>>> Just like an old fashioned letter, this email and any files transmitted with it should probably be treated as confidential and intended solely for your own use. 
>>> Please note that any interesting spelling is usually my own and may have been caused by fat thumbs on a tiny tiny keyboard.
>>> Should any part of this message prove to be useful in the event of the imminent Zombie Apocalypse then the sender bears no personal, legal, or moral responsibility for any outcome resulting from its usage unless the result of said usage is the unlikely defeat of the Zombie Hordes in which case the sender takes full credit without any theoretical or actual legal liability. :-)
>>> Be nice to your parents.
>>> Go outside and do something awesome - Draw, paint, walk, setup a radio station, go fishing or sailing - just do something that makes you happy.
>>> ^G ^G ^G ^G ^G ^G ^G ^G- In more laid back days this line would literally sing ^G ^G ^G ^G ^G ^G ^G ^G 
>>> 
>>> 
>>> 
>>> 
>>> On Tue, Sep 22, 2020 at 1:04 PM ColinMuirDorward <colindorward at gmail.com <mailto:colindorward at gmail.com>> wrote:
>>> Hi folks,
>>> Does anyone have any suggestions for switches that can be installed into the body of a mic? 
>>> I'm about to mod an mxl990 and would like to add a switch to select between omni or cardioid pattern. (The new capsule has both). 
>>> As for the switch itself, I'm not really sure what I'm looking for, so any ideas are welcome!
>>> Cheers,
>>> Colin
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>>> http://synth-diy.org/mailman/listinfo/synth-diy <http://synth-diy.org/mailman/listinfo/synth-diy>
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>>> http://synth-diy.org/mailman/listinfo/synth-diy <http://synth-diy.org/mailman/listinfo/synth-diy>
>> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200922/be1be60e/attachment.htm>