[sdiy] Moog Memorymoog clone almost completed

[Gordonjcp]

On Thu, Oct 15, 2020 at 12:07:43PM -0300, Luís Marka wrote:
> Hi folks!
> 
> After dedicating some time to this project, my very own Memorymoog clone is
> nearly completed! Still missing the buttons, so far the 3D printed attempts
> turned out bad. Also, the 9mm thickness aluminum side cheeks are not done,
> as well as adaptors for the dual concentric frequency potentiometer knobs.

This looks *incredible*.  Every detail is just perfect.

Watch everyone else on the list sell their tools :-D

> 
> It seems to be more stable than the old Memorymoog I used to own a couple
> decades ago - no autotune update on that unit, which is built into my
> clone. I get "6 tuned" at pretty much every attempt, as long as I allow for
> some 15 to 20 minutes warmup.
> 
> The sound is, as far as I can tell, exactly the same as a stock Memorymoog:
> all circuits are exactly the same.

Have you got any audio demos up?

> I tested several LEDs to decide on a color, and figured the diffuse white
> looked better than the original red ones.

It's certainly a clean look.

-- 
Gordonjcp