[sdiy] Moog Memorymoog clone almost completed

[TERRY SHULTZ]

Hi,

This is a good looking unit.

Who is the Keyboard supplier to this unit if I may ask ?\

I was using Panasonic keyboards on my earlier designs, but I cannot get these anymore since 1990.

My 5 octave Pratt-Reed units are down to the last 2 new unit in my store unit.

Regards,

Terry

> On Oct 15, 2020, at 10:43 AM, sleepy_dog at gmx.de wrote:
> 
> 
> Excuse my drool, sir, it's hard to contain.
> Now if that also sounds like it looks... :D
> 
> Luís Marka wrote:
>> Hi folks!
>> 
>> After dedicating some time to this project, my very own Memorymoog clone is nearly completed! Still missing the buttons, so far the 3D printed attempts turned out bad. Also, the 9mm thickness aluminum side cheeks are not done, as well as adaptors for the dual concentric frequency potentiometer knobs.
>> 
>> It seems to be more stable than the old Memorymoog I used to own a couple decades ago - no autotune update on that unit, which is built into my clone. I get "6 tuned" at pretty much every attempt, as long as I allow for some 15 to 20 minutes warmup.
>> 
>> The sound is, as far as I can tell, exactly the same as a stock Memorymoog: all circuits are exactly the same.
>> 
>> I tested several LEDs to decide on a color, and figured the diffuse white looked better than the original red ones.
>> 
>> Cheers!
>> 
>> <Mail Attachment.jpeg>
>> 
>> 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>> http://synth-diy.org/mailman/listinfo/synth-diy <http://synth-diy.org/mailman/listinfo/synth-diy>
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201016/0e8db892/attachment.htm>