[sdiy] Moog Memorymoog clone almost completed

[Jimmy Moore]

Absolutely awesome!! I would love to see a follow-up build log and BOM if
that's possible.

Where would this sit relative to the TTSH part count / complexity / cost?



On Thu, Oct 15, 2020 at 2:38 PM Ben Stuyts <ben at stuyts.nl> wrote:

> I believe Chris from Synth Cube is on this list, so let’s hope he chimes
> in!
>
> That is indeed a most excellent Memorymoog.
>
> Ben
>
>
> > On 15 Oct 2020, at 19:57, Kenny Balys <kenny at beatkamp.com> wrote:
> >
> >
> > Looks so very nice.
> >
> > Please consider talking with Synth Cube about putting together a
> > kit. They are fine folk to deal with. I built a TTSH from them and it
> > was nice to not chase around for parts and bits. Everything needed to
> > build the TTSH was in the box (as ordereded)
> >
> > In an arrangement like this you and SynthCube could make some money back.
> > Any why not?
> >
> > Just a suggestion...
> >
> >
> > On 15.10.20 17:43 , sleepy_dog at gmx.de wrote:
> >>
> >> Excuse my drool, sir, it's hard to contain.
> >> Now if that also sounds like it looks... :D
> >>
> >> Luís Marka wrote:
> >>> Hi folks!
> >>>
> >>> After dedicating some time to this project, my very own Memorymoog
> clone is
> >>> nearly completed! Still missing the buttons, so far the 3D printed
> attempts
> >>> turned out bad. Also, the 9mm thickness aluminum side cheeks are not
> done, as
> >>> well as adaptors for the dual concentric frequency potentiometer knobs.
> >>>
> >>> It seems to be more stable than the old Memorymoog I used to own a
> couple
> >>> decades ago - no autotune update on that unit, which is built into my
> clone. I
> >>> get "6 tuned" at pretty much every attempt, as long as I allow for
> some 15 to
> >>> 20 minutes warmup.
> >>>
> >>> The sound is, as far as I can tell, exactly the same as a stock
> Memorymoog:
> >>> all circuits are exactly the same.
> >>>
> >>> I tested several LEDs to decide on a color, and figured the diffuse
> white
> >>> looked better than the original red ones.
> >>>
> >>> Cheers!
> >>>
> >>> 20201014_180145-1328.jpg
> >>>
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at synth-diy.org
> > http://synth-diy.org/mailman/listinfo/synth-diy
> >
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201015/f01578da/attachment.htm>