[sdiy] Moog Memorymoog clone almost completed

[ulfur hansson]

THIS! i would go nuts and most definitely build one, especially if a full
kit could be purchased.

fim., 15. okt. 2020 kl. 18:00 skrifaði Kenny Balys <kenny at beatkamp.com>:

>
> Looks so very nice.
>
> Please consider talking with Synth Cube about putting together a
> kit. They are fine folk to deal with. I built a TTSH from them and it
> was nice to not chase around for parts and bits. Everything needed to
> build the TTSH was in the box (as ordereded)
>
> In an arrangement like this you and SynthCube could make some money back.
> Any why not?
>
> Just a suggestion...
>
>
> On 15.10.20 17:43 , sleepy_dog at gmx.de wrote:
> >
> > Excuse my drool, sir, it's hard to contain.
> > Now if that also sounds like it looks... :D
> >
> > Luís Marka wrote:
> >> Hi folks!
> >>
> >> After dedicating some time to this project, my very own Memorymoog
> clone is
> >> nearly completed! Still missing the buttons, so far the 3D printed
> attempts
> >> turned out bad. Also, the 9mm thickness aluminum side cheeks are not
> done, as
> >> well as adaptors for the dual concentric frequency potentiometer knobs.
> >>
> >> It seems to be more stable than the old Memorymoog I used to own a
> couple
> >> decades ago - no autotune update on that unit, which is built into my
> clone. I
> >> get "6 tuned" at pretty much every attempt, as long as I allow for some
> 15 to
> >> 20 minutes warmup.
> >>
> >> The sound is, as far as I can tell, exactly the same as a stock
> Memorymoog:
> >> all circuits are exactly the same.
> >>
> >> I tested several LEDs to decide on a color, and figured the diffuse
> white
> >> looked better than the original red ones.
> >>
> >> Cheers!
> >>
> >> 20201014_180145-1328.jpg
> >>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>


-- 
•
ulfurhansson.com
instagram.com/ulfur_
.•°~ Úlfur - Arborescence on Spotify
<https://open.spotify.com/album/118CEJliIg47Jcr70y7Kww>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201015/5994f52c/attachment.htm>