[sdiy] Moog Memorymoog clone almost completed

[sleepy_dog at gmx.de]

Excuse my drool, sir, it's hard to contain.
Now if that also sounds like it looks... :D

Luís Marka wrote:
> Hi folks!
>
> After dedicating some time to this project, my very own Memorymoog
> clone is nearly completed! Still missing the buttons, so far the 3D
> printed attempts turned out bad. Also, the 9mm thickness aluminum side
> cheeks are not done, as well as adaptors for the dual concentric
> frequency potentiometer knobs.
>
> It seems to be more stable than the old Memorymoog I used to own a
> couple decades ago - no autotune update on that unit, which is built
> into my clone. I get "6 tuned" at pretty much every attempt, as long
> as I allow for some 15 to 20 minutes warmup.
>
> The sound is, as far as I can tell, exactly the same as a stock
> Memorymoog: all circuits are exactly the same.
>
> I tested several LEDs to decide on a color, and figured the diffuse
> white looked better than the original red ones.
>
> Cheers!
>
> 20201014_180145-1328.jpg
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201015/81512a48/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 364445 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201015/81512a48/attachment.jpe>