[sdiy] Moog Memorymoog clone almost completed

[James Coplin]

Thats an astonishing large clone project - congrats on being nearly finished. Where did you find the dual concentric pots?

James

On Oct 15, 2020, 10:19 AM, at 10:19 AM, "Luís Marka" <luis.marka at gmail.com> wrote:
>Hi folks!
>
>After dedicating some time to this project, my very own Memorymoog
>clone is
>nearly completed! Still missing the buttons, so far the 3D printed
>attempts
>turned out bad. Also, the 9mm thickness aluminum side cheeks are not
>done,
>as well as adaptors for the dual concentric frequency potentiometer
>knobs.
>
>It seems to be more stable than the old Memorymoog I used to own a
>couple
>decades ago - no autotune update on that unit, which is built into my
>clone. I get "6 tuned" at pretty much every attempt, as long as I allow
>for
>some 15 to 20 minutes warmup.
>
>The sound is, as far as I can tell, exactly the same as a stock
>Memorymoog:
>all circuits are exactly the same.
>
>I tested several LEDs to decide on a color, and figured the diffuse
>white
>looked better than the original red ones.
>
>Cheers!
>
>[image: 20201014_180145-1328.jpg]
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at synth-diy.org
>http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201015/8f66bc2d/attachment.htm>