[sdiy] Moog Memorymoog clone almost completed

[Luís Marka]

Hi folks!

After dedicating some time to this project, my very own Memorymoog clone is
nearly completed! Still missing the buttons, so far the 3D printed attempts
turned out bad. Also, the 9mm thickness aluminum side cheeks are not done,
as well as adaptors for the dual concentric frequency potentiometer knobs.

It seems to be more stable than the old Memorymoog I used to own a couple
decades ago - no autotune update on that unit, which is built into my
clone. I get "6 tuned" at pretty much every attempt, as long as I allow for
some 15 to 20 minutes warmup.

The sound is, as far as I can tell, exactly the same as a stock Memorymoog:
all circuits are exactly the same.

I tested several LEDs to decide on a color, and figured the diffuse white
looked better than the original red ones.

Cheers!

[image: 20201014_180145-1328.jpg]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201015/71ca646d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20201014_180145-1328.jpg
Type: image/jpeg
Size: 364445 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201015/71ca646d/attachment.jpg>