[sdiy] Designing front panels for synths

[Roman Sowa]

Here you are, 90kB picture taken just now.
The bottom base plate, end cheeks and front bar are made of chipboard. 
Everything else is PCB (except the keys obviously).
The sad thing is also seen in this picture, it's standing in the storage 
among other sad keyboards :(

Roman

W dniu 2020-10-15 o 11:41, Adam Inglis (sdiy) pisze:
> 
> 
>> On 15 Oct 2020, at 6:44 pm, Roman Sowa <modular at go2.pl 
>> <mailto:modular at go2.pl>> wrote:
>>
>> The biggest thing I made out of PCB was 140cm long cover for DIY 
>> keyboard and it feels almost like made out of 1mm steel, and because 
>> it's easily solderable, I could build fancy mounting system, so there 
>> are absolutely no screws on top.
> 
> 
> OK Roman, you can’t get away with that statement … without a picture!! 
>   C’mon, we need evidence...
> 
> A
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSC_3651.jpg
Type: image/jpeg
Size: 91466 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201015/4c13d35a/attachment.jpg>