[sdiy] After 4 months of hard work.. I built two Moog 960 sequencers clones.. here is a video !!!

[Pete Hartman]

Hopefully you're using your own panel as well.

I'm working on this layout (nearly done, one minor bit to finesse), and I
found out the hard way that the Bridechamber panel is NOT actually
perfectly circular in its layout.

You can't tell looking at it from any distance, but up close and personal,
a perfectly circular layout does not fit the panel.

BTW this project is not so much a panel PCB as an all-in-one.  I love Ray's
work, and we all owe him a lot for his role, but his dislike for actual
headers would make it pretty difficult to try and line up his original PCB
signals with a panel PCB in the same way as, for example, NV did for the
Euro Klee etc.

Pete

On Fri, Nov 20, 2020 at 5:25 PM David G Dixon <dixon at mail.ubc.ca> wrote:

>
> I'll be laying out my own panel PCB.  In fact, I'm about 50% done with that
> undertaking.  I started it about two years ago, but then got involved with
> other things and stopped working on it.
>
> It turns out that it's not that hard to lay out a bunch of pots in a
> circular pattern (in Excel, of course).
>
>
> chris wrote:
>
> With regards to the MFOS Sequencer, if you're considering a 5U format
> version build, there may be a pcb panel in the works to reduce and simplify
> the flying wires.
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201120/24bdea54/attachment.htm>