[sdiy] plug in pots

[Florian Anwander]

Nice hint. I could imagine that this is very common on Equipment for DJs.

Am 14.11.20 um 03:06 schrieb Adam Inglis (synthDIY):
> I don’t get a look at much “modern” gear, so maybe this is 
> unremarkable, however someone on the SOS forums was mentioning how 
> helpful Drawmer were in replacing a pot on one of their monitor 
> controllers, and they posted this picture...
>
> Re: Disassembling Drawmer CMC2? 
> <https://www.soundonsound.com/forum/viewtopic.php?f=24&t=74544#p718908>
>
> It appears that the pots are simply plugged in to the main board via 
> some header arrangement.
> For pots that get a lot of use, I thought that was a brilliant idea!
>
>
> A
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201118/f58f8f57/attachment.htm>