[sdiy] Power Cable Help

[Jacob Watters]

Thank you very much! Those tips will help me out a lot in the future :)


You'd think that after 10 years of synth DIY, I would've learned by now
that the answer is almost always "Read the datasheet."


*Jacob Watters*
JacobWatters.com <http://jacobwatters.com/>


On Tue, Nov 17, 2020 at 12:32 PM Chromatest J. Pantsmaker <
chromatest at azburners.org> wrote:

> I think you'd just buy the corresponding male connectors and make your own
> cables.  You'll need a crimp tool, or you could solder them if needed.
>
> Oh, they do make cables.
>
> On that page you sent, click on the link "Learn more about Molex
> 39-30-1060 <https://www.mouser.com/molex-minifit-jr-connectors>".  You
> will see listings for other items that fit that product.  That includes
> cables and connectors.
>
> Also on that page, look at the datasheet.  On the right side you'll see a
> section of "Mates With".
>
> On Tue, Nov 17, 2020 at 10:21 AM Jacob Watters <jacobwatters at gmail.com>
> wrote:
>
>> I always have trouble finding cables, headers and non-component stuff on
>> mouser. I am trying to find cables that match the headers on the eurorack
>> bus boards that I bought from someone.
>>
>> Here are the headers:
>> https://www.mouser.ca/ProductDetail/Molex/39-30-1060?qs=%2Fha2pyFaduiYanvHuYwzAujaZAh4thrL0W%2FwyptaGXlh28cho3eUwg==
>>
>> I need two cables with the male connected that are about a foot long.
>>
>> I have found stuff that is similar, but I can't find that exact match.
>>
>>
>> *Jacob Watters*
>> JacobWatters.com <http://jacobwatters.com/>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>> Selling or trading? Use marketplace at synth-diy.org
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201117/2bf17132/attachment.htm>