[sdiy] Power Cable Help

Tue Nov 17 18:32:22 CET 2020

I think you'd just buy the corresponding male connectors and make your own
cables.  You'll need a crimp tool, or you could solder them if needed.

Oh, they do make cables.

On that page you sent, click on the link "Learn more about Molex 39-30-1060
<https://www.mouser.com/molex-minifit-jr-connectors>".  You will see
listings for other items that fit that product.  That includes cables and
connectors.

Also on that page, look at the datasheet.  On the right side you'll see a
section of "Mates With".

On Tue, Nov 17, 2020 at 10:21 AM Jacob Watters <jacobwatters at gmail.com>
wrote:

> I always have trouble finding cables, headers and non-component stuff on
> mouser. I am trying to find cables that match the headers on the eurorack
> bus boards that I bought from someone.
>
> Here are the headers:
> https://www.mouser.ca/ProductDetail/Molex/39-30-1060?qs=%2Fha2pyFaduiYanvHuYwzAujaZAh4thrL0W%2FwyptaGXlh28cho3eUwg==
>
> I need two cables with the male connected that are about a foot long.
>
> I have found stuff that is similar, but I can't find that exact match.
>
>
> *Jacob Watters*
> JacobWatters.com <http://jacobwatters.com/>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201117/ba854237/attachment.htm>