[sdiy] plug in pots

[ColinMuirDorward]

Looks like a standard-issue pot pre-soldered onto a breakout PCB,
presumably with pinheaders to do the plugging?

On Fri, Nov 13, 2020 at 9:09 PM Adam Inglis (synthDIY) <
synthdiy at adambaby.com> wrote:

> I don’t get a look at much “modern” gear, so maybe this is unremarkable,
> however someone on the SOS forums was mentioning how helpful Drawmer were
> in replacing a pot on one of their monitor controllers, and they posted
> this picture...
>
> Re: Disassembling Drawmer CMC2?
> <https://www.soundonsound.com/forum/viewtopic.php?f=24&t=74544#p718908>
>
> It appears that the pots are simply plugged in to the main board via some
> header arrangement.
> For pots that get a lot of use, I thought that was a brilliant idea!
>
>
> A
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>


-- 
https://www.instagram.com/colinmuirdorward/
-
<https://www.instagram.com/colinmuirdorward/>
https://www.instagram.com/ssdp_synthesis/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201113/31814ccb/attachment.htm>