[sdiy] My new Moog 960 sequencer clone module project.. slowly but surely ..

Mon Nov 9 19:39:59 CET 2020

Agree !

De : Synth-diy [mailto:synth-diy-bounces at synth-diy.org] De la part de Tom Wiltshire
Envoyé : 9 novembre 2020 13:15
À : David G Dixon
Cc : john slee; Synth-diy at synth-diy.org
Objet : Re: [sdiy] My new Moog 960 sequencer clone module project.. slowly but surely ..

Hang on…3/8” bushing, 1/2” nut, and…6mm shaft?!?

Honestly, the electronics world is such a mess with units.

Tom

==================
       Electric Druid
Synth & Stompbox DIY
==================

On 9 Nov 2020, at 17:48, David G Dixon <dixon at mail.ubc.ca> wrote:

Let me just put in a plug here for the new-style PCB-mount 16mm Alpha pots.  These have solder tabs which are 0.1" closer to the body than the older ones, and they have much beefier 3/8" shanks (the same as 1/4" jacks) and appear to be made out of a higher-quality metal.  I buy mine from Small Bear, and I have been very very happy with them -- here is the URL:

http://smallbear-electronics.mybigcommerce.com/alpha-single-gang-16mm-pc-mount-6-mm-shaft/

These pots are exactly the same height as the Taiway PCB-mount mini-toggle switches that I also buy from Small Bear; for example, the SPDT On-On ones here:

http://smallbear-electronics.mybigcommerce.com/spdt-on-on-pc-mount/

Small Bear also stocks (at my request) 1/4 switching PCB-mount Switchcraft jacks, but these are not the same height as the pots and switches, so they require a separate PCB at a different height:

http://smallbear-electronics.mybigcommerce.com/1-4-in-mono-n-c-switch-enclosed-pc-mount-switchcraft-112apcx/

With these and some layout art, you can make a very nice panel PCB with very little wiring.

  _____  

From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of john slee
Sent: Monday, November 09, 2020 1:29 AM
To: Synth-diy at synth-diy.org
Subject: Re: [sdiy] My new Moog 960 sequencer clone module project.. slowly but surely ..

[CAUTION: Non-UBC Email] 

Like yourself and David I also wondered about a panel PCB, being thoroughly allergic to wiring. But sometimes finding parts that are both what you want *and* close enough to each other in height... can be difficult

Regardless, it is a really lovely build, as Jean-Pierre’s builds always seem to be, and I particularly like that much or all of the logic stuff has been wrapped up into firmware.

John

On Mon, 9 Nov 2020 at 20:17, Roman Sowa <modular at go2.pl> wrote:

One thing I hated the most while refurbishing 960 was the wiring. There 
are places where several wires, maybe 5 or 6 are soldered in 1cm2 area 
with not a milimeter of spare wire to pull. I mean it's one of the 
earliest examples of non-repairable thing so popular now in smartphone 
industry. You could take it all apart like panel, all PCBs, and all the 
controls alone would still hold together in grid, so many wires.
And it looks like you're going the same path, so... good luck.
As it was said already, maybe it's good time to consider making panel 
PCB to avoid wiring hell, and move this 50-year old design slightly 
ahead by merely 15 years.

Don't get me wrong, I like what you do, enjoy your pictures every time, 
and I'm impressed by how you still make this thing while the rest of the 
world seems to waste time on pointless wars.

Roman

W dniu 2020-11-09 o 00:30, Jean-Pierre Desrochers pisze:
>
> Hi all,
>
> Just to show you where I’m going so far in my Moog 960 sequencer clone 
> project..
>
> I’m happy with the actual (not finished yet) results..
>
> Here <http://www.arcenson.com/public/Moog_960_clone/> is the link to 
> some pictures:
>
> The first 2 pictures show the front panel made out from
>
> a thin 5 mils PCB with no copper. Spray glued to the metal plate then 
> all punched.
>
> The last picture shows an empty IC socket.. That’s the PIC micro who 
> will actually
>
> do all the original Flip-Flop circuitry jobs..
>
> I’m building two of these !
>
> I LOVE IT !!!!!
>
> JP
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org

_______________________________________________
Synth-diy mailing list
Synth-diy at synth-diy.org
http://synth-diy.org/mailman/listinfo/synth-diy
Selling or trading? Use marketplace at synth-diy.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201109/0f6eb1f9/attachment.htm>