[sdiy] "tilt" circuit

john slee indigoid at oldcorollas.org
Wed May 20 23:06:21 CEST 2020


Were you involved in Springray? (It's my favourite spring reverb module!)

John

On Thu, 21 May 2020 at 04:42, David G Dixon <dixon at mail.ubc.ca> wrote:

> I've also used the Elliott tilt circuit, in some Intellijel module (can't
> remember which one right now).
>
> -----Original Message-----
> From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Paul
> Perry
> Sent: Wednesday, May 20, 2020 5:36 AM
> To: ulfur hansson; synth-diy at synth-diy.org
> Subject: Re: [sdiy] "tilt" circuit
>
> Rod Elliott has this covered. Section 10 on this page:
> https://sound-au.com/articles/eq.htm
>
> paul perry Melbourne Australia
>
> ------ Original Message ------
> From: "ulfur hansson" <ulfurh at gmail.com>
> To: "synth-diy mailing list" <synth-diy at synth-diy.org>
> Sent: 20/05/2020 10:22:46 PM
> Subject: [sdiy] "tilt" circuit
>
> >hello list,
> >
> >i have been wanting to elaborate on a synth master output stage for a
> while, and these strange times have cleared up space for prototyping
> time...
> >
> >i have been thinking about a "tilt" circuit that could shift weight
> between
> volume on a hipass and lowpass circuit, effectively making it brighter or
> darker as you turn a single knob.
> >
> >of course an xfade with a hi/lopass derived from an svf could be the
> answer, but it seems rather huge for a simple idea - are there any simpler
> ways to achieve this that come to mind?
> >
> >hope you all are safe and well,
> >-ulfur
> >
> >Sent from outer space
> >_______________________________________________
> >Synth-diy mailing list
> >Synth-diy at synth-diy.org
> >http://synth-diy.org/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200521/aaa8b9c0/attachment.htm>


More information about the Synth-diy mailing list