[sdiy] "tilt" circuit
David G Dixon
dixon at mail.ubc.ca
Wed May 20 20:38:05 CEST 2020
I've also used the Elliott tilt circuit, in some Intellijel module (can't
remember which one right now).
From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Paul
Sent: Wednesday, May 20, 2020 5:36 AM
To: ulfur hansson; synth-diy at synth-diy.org
Subject: Re: [sdiy] "tilt" circuit
Rod Elliott has this covered. Section 10 on this page:
paul perry Melbourne Australia
------ Original Message ------
From: "ulfur hansson" <ulfurh at gmail.com>
To: "synth-diy mailing list" <synth-diy at synth-diy.org>
Sent: 20/05/2020 10:22:46 PM
Subject: [sdiy] "tilt" circuit
>i have been wanting to elaborate on a synth master output stage for a
while, and these strange times have cleared up space for prototyping time...
>i have been thinking about a "tilt" circuit that could shift weight between
volume on a hipass and lowpass circuit, effectively making it brighter or
darker as you turn a single knob.
>of course an xfade with a hi/lopass derived from an svf could be the
answer, but it seems rather huge for a simple idea - are there any simpler
ways to achieve this that come to mind?
>hope you all are safe and well,
>Sent from outer space
>Synth-diy mailing list
>Synth-diy at synth-diy.org
Synth-diy mailing list
Synth-diy at synth-diy.org
More information about the Synth-diy