[sdiy] Power supply for custom Eurorack case

[Matti Palm]

I made bus boards that I am happy with:
https://github.com/mattip123/Eurorack-Bus-board
And also a simple linear PSU with LM317/LM337 that I find low noise:
https://github.com/mattip123/PSU-Matti
Maybe it can be of help if you use KiCad and want a starting point.

/matti

On Tue, Jan 28, 2020 at 8:12 AM Brian Willoughby <brianw at audiobanshee.com>
wrote:

> If you’re going to the trouble of making custom bus boards, why not just
> put a few extra parts on there and make a power supply? Grab a book that
> covers audio power supplies.
>
> Lately, I’ve been favoring external wall warts that output AC instead of
> the typical DC. I then use the simply two-conductor barrel connector to
> feed a bog standard linear regulator. If you need multiple voltages, pull
> them all off the same leg.
>
>
> I just bought a 7U by 104HP case myself, so I’m just getting started
> designing my own 1U modules. I’m still new myself, but it seems that 1U is
> typically 5V-powered, and intellijel seem to have simpler 2-wire 5V supply
> cables and connectors for the same on their power supplies. Then again, I
> may be missing something.
>
> Brian
>
>
> On Jan 27, 2020, at 9:51 PM, Didier Leplae via Synth-diy <
> synth-diy at synth-diy.org> wrote:
> >
> >> How are you handling distribution?
> >
> > I was considering making some custom bus boards as well, just to save
> $$.
>
>
> On Mon, Jan 27, 2020 at 10:28 PM Didier Leplae via Synth-diy <
> synth-diy at synth-diy.org> wrote:
> > I hope this question hasn't been covered ad nauseam in the past but here
> goes...
> >
> > I built a custom case for Eurorack that is 84 hp wide.
> > It has 7 "normal" rows plus a 1u row. (I guess that makes a total of 672
> hp)
> >
> > I have roughly figured I will need a power supply with @ 3A for +12V and
> 2A for -12V. (The 5V seems to be hardly used and yet the power supplies
> I've looked at have an overabundance, probably 1A would be plenty )
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200128/39a92847/attachment.htm>