[sdiy] LM555 mono stable question

[Ullrich Peter]

A retriggerable 555 circuit could help here:

http://de.f-alpha.net/elektronik/integrierte-schaltungen/timer-555/weiter-gehts/experiment-13-retriggerable-monoflop/

Ciao
Peter

http://www.ullrich.at.tt

________________________________________
Von: Synth-diy <synth-diy-bounces at synth-diy.org> im Auftrag von Jean-Pierre Desrochers <jpdesroc at oricom.ca>
Gesendet: Samstag, 18. Jänner 2020 21:57
An: synth-diy at synth-diy.org
Betreff: [sdiy] LM555 mono stable question

That should be an easy one for you guys...

I'm working on a mono stable circuit using a 555.
Input: small low going  pulse (5v to 0,  5usec) on pin 2.
Output pulse: allways  .050sec  high going pulse (0 to 5v)  on pin 3
This is this circuit:
https://alxslvrmn.weebly.com/555-monostable-diagrams.html

I tweaked R1 & C1 to get this 0.050sec output pulses..
This circuit works pretty well if I keep the incoming pulses
periods higher than .050sec in this case..
If I go lower than .050sec between each input pulses it's understandable
The 555 pin 3 output does not stay high because of the 555 nature..
But is there a way to overcome this situation ?
Should I use another approach ? Using another IC than the 555 ?
In fact what I need is a pulsating.050sec  output that will stay high
If I exceed the .050sec input limitation here (lower input pulses period
than .050sec).
JP

_______________________________________________
Synth-diy mailing list
Synth-diy at synth-diy.org
http://synth-diy.org/mailman/listinfo/synth-diy



The information contained in this e-mail message is privileged and confidential and is for the exclusive use of the addressee. The person who receives this message and who is not the addressee, one of his employees or an agent entitled to hand it over to the addressee, is informed that he may not use, disclose or reproduce the contents thereof, and is kindly asked to notify the sender and delete the e-mail immediately.