[sdiy] MonoPoly SSM2033 Insanity

[Adam Inglis (sdiy)]

Randel, are you saying that each and every oscillator is oscillating at supra-audio frequencies, but not at audio frequencies? Can you elaborate?


Adam

> On 24 Feb 2020, at 8:21 am, Randel Osborne <randel at redshift-consulting.com> wrote:
> 
> Hello-
> 
> I have a MonoPoly on the repair bench that has me baffled.
> 
> All oscillators output the appropriate waveforms, but at 32KHz, and don’t keyboard track.
> 
> All CVs leading to the 2033 are as expected.
> 
> Pin 5 of the SSM2033 is CV in, as per the spec sheet.
> 
> Pin 5 is not connected to the circuit board. There isn’t even a solder pad. This is the same for all 4 oscillators.
> 
> Pin 5 is not connected to the CV on the schematics, although it comes really close, and looks like it should be.
> 
> What am I missing?
> 
> Does anyone have any experience with this beast?
> 
> Thanks.
> 
> 
> -Randel
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200224/c9fcb3e3/attachment.htm>