[sdiy] LFO VC Skew?

David G Dixon dixon at mail.ubc.ca
Tue Feb 18 03:37:14 CET 2020

I’ve struggled with this mightily and come to no solution in the analog realm.  The problem is that there seems to be no way to implement the magic of a potentiometer fed on both ends with VCAs.  I’ve been through the math, and it seems impossible.  The original circuit (two diodes and a potentiometer in the loop of a tri-square oscillator) is so simple and elegant, and yet so elusive for voltage control, other than physically rotating the damn pot with a servo.


It’s easy to get saw-to-tri-to-ramp with VCAs, but the trick is to maintain the same frequency when you do so.  That’s the impossible part.


It is probably easily done digitally, but where’s the fun in that?


Unless I’m dumb.



From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of ackolonges fds
Sent: Monday, February 17, 2020 6:02 AM
To: SDIY List
Subject: [sdiy] LFO VC Skew?


Hi All,


I'm a big fan of the 'skew' (sweep from sawtooth, through triangle, over to ramp wave) function of some analogue LFOs and find it indispensable. I would love to be able to CV the skew function though it generally doesn't seem to be an option. Some circuits seem to control skew by having a pot control the balance between current flowing each direction via two diodes with opposite polarity (eg. the MFOS VCLFO circuit, or the Nicolas Woolaston LFO circuit), which seems like a particularly tricky thing to be able to voltage-control.


I was wondering if anyone here knows of any existing circuits which provide that functionality, or have any ideas as to how one may go about making it happen?


Thanks a lot for any input 🙂

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200217/f49afd99/attachment.htm>

More information about the Synth-diy mailing list