[sdiy] 45 vs. 90 degree pcb traces

[Ben Stuyts]

> On 14 Feb 2020, at 22:54, Didrik Madheden <nitro2k01 at gmail.com> wrote:
> 
> On Fri, Feb 14, 2020, 20:06 Ben Stuyts <ben at stuyts.nl <mailto:ben at stuyts.nl>> wrote:
> Also, 45 degree corner is a misnomer in this context but everybody seems to call it that way historically. It should be called a 135 degree corner.
> 
> Ben
> 
> I think 45 degrees is not referring to the absolute number of degrees, but that you're locked to increments of 45 degrees instead of increments of 90 degrees.

Agreed, but you often read “45 degree corner”, and that’s just wrong in my OCD.

Ben

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200214/f3a8901b/attachment.htm>