[sdiy] 45 vs. 90 degree pcb traces

Quincas Moreira quincas at gmail.com
Fri Feb 14 23:25:27 CET 2020


You guys... <3


Sent from my iPhone

> On 14 Feb 2020, at 16:10, Guy McCusker <guy.mccusker at gmail.com> wrote:
> 
> 
> If someone tells you to walk 3m forward, then turn 45 degrees right and walk another z3m, what would you do? I’d tell them not to be so bossy but you see the point I’m sure. 
> 
>> On Fri, 14 Feb 2020 at 21:55, Didrik Madheden <nitro2k01 at gmail.com> wrote:
>>> On Fri, Feb 14, 2020, 20:06 Ben Stuyts <ben at stuyts.nl> wrote:
>>> Also, 45 degree corner is a misnomer in this context but everybody seems to call it that way historically. It should be called a 135 degree corner.
>>> 
>>> Ben
>> 
>> I think 45 degrees is not referring to the absolute number of degrees, but that you're locked to increments of 45 degrees instead of increments of 90 degrees.
>> 
>> /Didrik
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200214/5b74e9a2/attachment.htm>


More information about the Synth-diy mailing list