[sdiy] 45 vs. 90 degree pcb traces

[Guy McCusker]

If someone tells you to walk 3m forward, then turn 45 degrees right and
walk another z3m, what would you do? I’d tell them not to be so bossy but
you see the point I’m sure.

On Fri, 14 Feb 2020 at 21:55, Didrik Madheden <nitro2k01 at gmail.com> wrote:

> On Fri, Feb 14, 2020, 20:06 Ben Stuyts <ben at stuyts.nl> wrote:
>
>> Also, 45 degree corner is a misnomer in this context but everybody seems
>> to call it that way historically. It should be called a 135 degree corner.
>>
>> Ben
>>
>
> I think 45 degrees is not referring to the absolute number of degrees, but
> that you're locked to increments of 45 degrees instead of increments of 90
> degrees.
>
> /Didrik
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200214/211e3577/attachment.htm>