[sdiy] PCB / Panel Manufacture

John P Shea info at extrinia.com
Sun Feb 9 22:27:28 CET 2020


Just wondering why you have different species of caps for C3/C4 and C5/C6?

Regards,
JPS

On Mon, 10 Feb 2020 at 2:27 am, Shawn Rakestraw <shawnrakestraw at gmail.com>
wrote:

> Thanks Ingo, good point about the trace width. I will add the vias as
> well! You guys and gals have all helped me greatly and I feel much more
> comfortable with this whole process.
>
> On Sun, Feb 9, 2020 at 10:45 AM Ingo Debus <igg.debus at gmail.com> wrote:
>
>>
>> > Am 08.02.2020 um 22:40 schrieb Shawn Rakestraw <shawn at epicpoolsga.com>:
>> >
>> > Here's a revision that improved things I believe.
>>
>> Yes, that’s pretty much how I would do the layout too. If you want it
>> 120% perfect, you can add plenty vias connecting the ground planes on both
>> sides to ensure they’re both at the same potential. But that’s probably not
>> necessary for a linear power supply.
>>
>> > I used the widest traces that I could
>>
>> Surely the traces are wide enough now. However, if you need wider traces,
>> in Eagle you can enter numerical values instead of choosing a width from
>> the drop-down menu.
>>
>> Ingo
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200210/f8e1bd08/attachment.htm>


More information about the Synth-diy mailing list