[sdiy] Panning (again)

[Mattias Rickardsson]

Douglas Self shows this connection as the first example in the Passive
Panpots subchapter of his Small Signal Audio Design book, with the
description
"... has several disadvantages, not least the poor offness when panned hard
over, caused by the current flowing through the wiper contact resistance to
ground."

The rest is left to the reader, but thanks to separated L/R channels with
law-bending resistors, the story ends well. And most of you have already
figured out that the next subchapter is even better. ;-)

/mr

Den tis 15 dec. 2020 19:34David G Dixon <dixon at mail.ubc.ca> skrev:

> Hey Team,
>
> I've been thinking about this panning thing, and I came up with the
> following very simple pot-based panning circuit:
>
>
> The gain responses of this circuit are shown below, and compared with sin
> and cos responses:
>
>
> I believe that I can create a voltage-controlled version of this simple
> pot panning circuit fairly easily by replacing the pot with a pair of
> modified Irwin 2164 circuits.  I did this for the Morphing LFO.
>
> Would this response suffice as an "equal power" panner?
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201215/ac7de902/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SimplePanner.png
Type: image/png
Size: 5917 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201215/ac7de902/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PanPlot.png
Type: image/png
Size: 6525 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20201215/ac7de902/attachment-0001.png>