[sdiy] WTB: j-wires for pratt read keyboard in US

[Barry Klein]

What does a 3 1/2 octave keyboard go for now with j-wire contacts?  I have one that is part of my synth developed when writing my book. Been collecting dust sitting above my workbench for years. Synth too for that matter... 





> On Aug 20, 2020, at 7:18 AM, Nathan Trites <nathan at idmclassics.net> wrote:
> 
> 
> I've got a Prophet 5 here that needs a few of the j-wires replaced (broken before the buss bar), and I'm starting to see enough Pratt Read keybeds I should keep some on hand. 
> 
> Are there any US or North American sources for these that are under $10/ea? I'd be interested in buying 10-25 if I can get them around $5. 
> 
> I know I can get them from the Netherlands but shipping within the US is unpredictable enough as it is :)
> 
> Thanks!
> 
> Nathan
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200820/3cb2f072/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 126869 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200820/3cb2f072/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 123427 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20200820/3cb2f072/attachment-0001.jpeg>